All-New Block Lock ADI Pin

Garage Lock Pin Replacement

This is a replacement pin for the common garage lock. This is an ADI Block Lock. The old style did not have the smooth round edges but it did have the same pin and is the same lock. The pin is locked by sliding it through the lock body. You then turn the key to lock it in.

If you have a lock and have lost the pin, We sell the ADI block lock pin and you can get your garage working and locking again.

Note this pin dose come in different sizes and this is the standard size. if you need longer pin, please email us.

**** THE NEW STOCK OF PINS HAVE SOMETIMES BEEN A BIT HARD TO USE BECAUSE OF THE CHROME PLATE***

12.70 mm in Diameter

This is the only replacement part available and some time you may need to bore / hone / drill out the lock to suit the new size. This is an easy process that requires you to grab a drill and drill bit the same size as the bolt and put the key into the lock and turn, then drill the hole out.

This process is not often required, the pins are non returnable if you find they they do not fit well, the lock needs a re-drill. This is all we receive from the manufacture and its the only replacement parts available. If it needs a re-drill you will need to do that, and the parts are non returnable.

We have locksmiths in Sydney that can install a lost pin if needed. Charges apply.

Email us if you need a longer pin.

80% of the time it works with no work to the lock!

****** If you wan’t to keep the lock open, and not lose the pin, spin it around and lock it in upside down, the pin will lock into the lock so you don’t lose it, or we are happy to sell you a new pin when needed !!!